We design and build custom computer cases and parts from scratch. You can use this web-app to configure a layout in 3D for free. This is a simplified version of the design that we manufacture. If you like you can download the layout for your own home build. Alternatively email us your layout so we can go over details with you and produce a quote.
You can also download individual component files here
Here is my custom build from scratch enclosure project. I started this project in June 2017 because I wanted a case that could take a full size ATX motherboard, power supply and full size graphics cards. However with no 3.5" drives, optical drives or water cooling to keep it small, light weight and quiet. Since a case that met these requirements did not exist I decided to design and build my own.
I wanted a medium tower size with good air flow bottom to top. I also wanted to have a distributor plate on the front so there are no vent openings to keep it quiet.
I moved the power supply to the front of the enclosure and used an SFX form factor to get a good fit with the pump. Then I was able to fit two 360 rads along the whole length of the enclosure.
I used a Micro ATX motherboard because I was not going to need 7 PCI slots.
Looking back on the build I wish I had got a motherboard with built in RGB LED headers as I ended up having to get separate cables with built in controllers for the LED's in the Fans.
I also should change the connection from the pump to the front distributor plate to be a soft line tube at some point to minimise the bump vibration noise.